garage door cable repair.

Why Does One Side Snap First? Common Causes for Garage Door Cable Repair

If you have ever heard a sound like a gunshot coming from your garage, you likely witnessed the sudden failure of a garage door cable. Most homeowners find it baffling that while the door has two cables, usually only one side snaps or frays first. This creates a dangerous situation where the door hangs at a precarious angle, potentially crashing down or trapping your vehicle inside.

At Orlando FL Garage Door Repair Services, we see this phenomenon every day. Understanding why one side fails before the other can help you catch the warning signs early and prevent a total mechanical collapse.

The Physics of Uneven Tension

While a garage door looks like a singular unit, it actually relies on a delicate tug-of-war between two sides. These high-tension aircraft cables work in tandem with your springs to lift the weight of the door. Ideally, they share the load 50/50. However, perfection rarely lasts in a mechanical system. If your door is even slightly out of balance, one cable begins to pull harder than its partner.

This “asymmetrical load” means one side does the work of 1.5 cables while the other goes slack. Over hundreds of cycles, the overworked cable develops microscopic fractures and metal fatigue. Eventually, it reaches its breaking point and snaps, leaving the other side to bear the full weight of the door—which it usually cannot do for long. Orlando FL Garage Door Repair Services specializes in balancing these systems and providing expert garage door cable repair to ensure neither side carries an unfair share of the burden.

Corrosion and the "Drip" Factor

In the humid climate of Central Florida, corrosion is a silent killer for garage door hardware. You might wonder why one cable would rust while the other remains clean. Often, it comes down to the environment of your specific garage. If you have a small roof leak on one side of the garage, or if you store pool chemicals and salt near one track, the chemicals and moisture accelerate the oxidation process on that specific cable.

The bottom bracket—where the cable attaches to the door—is particularly vulnerable. As the metal rusts, it becomes brittle. A rusted cable loses its flexibility and starts to “burr” or fray. If you see silver flakes or rust colored dust near your bottom brackets, call Orlando FL Garage Door Repair Services immediately. A cable in this condition can snap at any moment, regardless of how new the other side looks.

Pulley and Drum Misalignment

The cables don’t just pull the door; they wrap around a circular component called a drum (in torsion systems) or travel over a pulley (in extension systems). If a drum is loose on the shaft or a pulley bearing is starting to seize, the cable will not track smoothly. It might rub against the edge of the metal or “jump” a groove.

Every time the cable rubs against a hard surface, it acts like a saw blade against the metal strands. This friction thins out the cable until it can no longer support the door’s weight. One side often snaps first simply because that specific pulley or drum shifted out of alignment by just a few millimeters. Our technicians at Orlando FL Garage Door Repair Services use precision tools to ensure your drums and pulleys are perfectly centered, preventing this localized wear and tear.

Pulley and Drum Misalignment

The cables don’t just pull the door; they wrap around a circular component called a drum (in torsion systems) or travel over a pulley (in extension systems). If a drum is loose on the shaft or a pulley bearing is starting to seize, the cable will not track smoothly. It might rub against the edge of the metal or “jump” a groove.

Every time the cable rubs against a hard surface, it acts like a saw blade against the metal strands. This friction thins out the cable until it can no longer support the door’s weight. One side often snaps first simply because that specific pulley or drum shifted out of alignment by just a few millimeters. Our technicians at Orlando FL Garage Door Repair Services use precision tools to ensure your drums and pulleys are perfectly centered, preventing this localized wear and tear.

Don't Replace Just One Cable

When one cable snaps, the most common mistake a homeowner can make is asking to replace only the broken one. At Orlando FL Garage Door Repair Services, we always recommend replacing both. If one side failed due to age or fatigue, the other side is almost certainly nearing the end of its lifespan as well. Furthermore, a new cable will have different elasticity than an old, stretched-out one, which can lead to further balance issues.

If you notice your door is leaning or you see frayed “hairs” on your cables, do not attempt to lift the door. Contact Orlando FL Garage Door Repair Services today to restore the safety and balance of your home.

Contact Orlando FL Garage Door Repair Services Today

Call us Here

Hours of Operation

Sun     7:00AM – 11:00PM
Mon    7:00AM – 11:00PM
Tue     7:00AM – 11:00PM
Wed    7:00AM – 11:00PM
Thur   7:00AM – 11:00PM
Fri       7:00AM – 11:00PM
Sat      7:00AM – 11:00PM

RECENT POST

Location